Welding Equipment

  branches   |  about   |  catalogues   |  history   |  ordering   |  technical   |  contact   |  links   |  online store    


PRODUCT SELECTOR:
Wrought Iron Components
Wire Mesh & Edging Sections
Tube Clamps & Tube
Expanded Metal
Perforated Metal
Flooring & Gratings
Handrailing
Steel Fencing Products
Perimeter Security
Roof Edge Protection
Gate Automation
Cantilever Gate Accessories
Sliding Door Hardware
Welding Products
Steel Sections
Channel Support
Steel Wire
Post Boxes
Paint and Sundries


Plasma Cutting

PLASMA 31
PLASMA 31 Plasma Cutting Package
A 1ph, 230v inverter, compressed air cutting system. Contact striking of pilot arc. Complete with torch, highly portable and weighing only 6.2kg. Max current of 15A @20% and max cutting thickness of 8mm.

STOCK CODE PRODUCT
60TWN815081 Plasma 31 Package
60TWN742400 Replacement Torch 

 
PLASMA 34
PLASMA 34 Plasma Cutting Package

 

Very popular, Single phase, fan-cooled inverter, compressed air cutting system with contact striking of pilot arc. Complete with torch, portable and weighing 12.5kg. Max current of 20A @25% and max cutting thickness of 6mm. Equipped with a compressor and needs no connection to an external compressed air power source.

 

STOCK CODE PRODUCT
60TWN815084 Plasma 34 Package
60TWN742400 Replacement Torch 

 
PLASMA 41
PLASMA 41 Plasma Cutting Package

 

Our popular Single phase, inverter, compressed air
cutting system. Micro-processor controlled with contact striking of pilot arc. Complete with torch, portable and weighing 12kg. Max current of 40A @30% and cutting thickness of 12mm. It allows rapid, distortion-proof cutting of steel, stainless steel, aluminium, copper & brass.

 

STOCK CODE PRODUCT
60TWN815085 Plasma 41 Package
60TWN742401 Replacement Torch 

 
PLASMA 80/3 HF
PLASMA 80/3 HF Plasma Cutting Package

 

Three phase, compressed air plasma cutting system on wheels, with HF (High Frequency) striking of pilot arc. It allows rapid, distortion-proof cutting of mild steel, stainless steel, galvanised steel, aluminium, copper & brass etc. It may be used with long nozzles and comes complete with torch. Max current of 30A @100%, a max cutting thickness of 20mm and weighs 80kg. 2 positions for regulation of cutting current and visualisation of air pressure.

 

STOCK CODE PRODUCT
60TWN830502 Plasma 80/3 HF Package
60TWN742401  Replacement Torch 

 
PLASMA 90 HFPLASMA 90 HF Plasma Cutting Package

 

Three phase, fan cooled inverter, compressed air plasma cutting system. Microprocessor controlled HF (High Frequency) striking of pilot arc. Complete with torch, earth cable and clamp and still portable weighing 30kg. Max current of 90A @40% and max cutting thickness of 30mm. Possibility to cut on mesh with automatic restart of the pilot arc..

 

STOCK CODE PRODUCT
60TWN815518 Plasma 90 HF Package
60TWN742401 Replacement Torch 

 
PLASMA 120/3 HFPLASMA 120/3 HF Plasma Cutting Package

 

Three phase, compressed air plasma cutting system on wheels with HF (High Frequency) striking of pilot arc. It allows rapid, distortion-proof cutting of mild steel, stainless steel, galvanised steel, aluminium, copper & brass etc. It may be used with long nozzles and comes complete with torch. Max current of 65A @60%, or 115A @30% and max cutting thickness of 30mm.Weighs 95kg.

 

STOCK CODE PRODUCT
60TWN830503 Plasma 120/3 HF Package
60TWN742401 Replacement Torch 

Alternative Power Sources and Safety Approvals
   

Plasma Cutting Torches

back to Welding index page

Visit our Online Store for full range details

© Copyright 2012 FH Brundle site design: Net-Coms     hosting: Consult-X