NM UNIVERSAL CUTTING TORCHES
|
The NM Cutter is a popular design
of oxy/fuel gas cutting
torch which is used with ANM, ANME, PNM, PNME,
ASNM and AGNM nozzles. It features 3/8" BSP inlet
fittings, pressure control knobs and a cutting oxygen lever
which, when pressed, produces a stream of high pressure
cutting oxygen. Available in 18", 27" and 36"
length with
900, 750 or 1800 head. |
| STOCK CODE |
PRODUCT |
| 60BU100B |
NM Torch 18/90 |
| 60BU100B75 |
NM Torch 18/75 |
| 60BU100B180 |
NM Torch 18/180 |
| 60BU200B |
NM Torch 27/90 |
| 60BU200B75 |
NM Torch 27/75 |
| 60BU200B180 |
NM Torch 27/180 |
| 60BU300B |
NM Torch 36/90 |
|
BARREL TYPE FLASHBACK ARRESTORS
|
Gauge shows pressure bottle contents
only. Output
pressure is determined by markings on knob.
300 bar oxygen service, acetylene 20 bar. |
| STOCK CODE |
PRODUCT |
| 60AU1001W |
Oxygen |
| 60AU1002W |
Fuel Gas |
|
RESETTABLE FLASHBACK ARRESTORS
|
Provide the highest possible level
of long-term protection.
Clearly indicate the occurrence of a flashback and can be
manually reset afterwards via their collar. Will withstand a
series of flashbacks but will not react as a consequence of external
heat. |
| STOCK CODE |
PRODUCT |
| 60AU2001 |
Oxygen |
| 60AU2002 |
Fuel Gas |
|
WELDING NOZZLES - HEAVY DUTY
|
For Heavy Duty style mixer. A full
High-Quality range. |
| STOCK CODE |
PRODUCT |
| 60CCSW01 |
# 1 - 0.9mm |
| 60CCSW02 |
# 2 - 1.2mm |
| 60CCSW03 |
# 3 - 2.0mm |
| 60CCSW05 |
# 5 - 2.6mm |
| 60CCSW07 |
# 7 - 3.2mm |
| 60CCSW10 |
#10 - 4.0mm |
| 60CCSW13 |
#13 - 5.0mm |
| 60CCSW18 |
#18 - 6.5mm |
| 60CCSW25 |
#25 - 8.2mm |
|
WELDING NOZZLES - LIGHT DUTY
|
Smaller swaged style nozzles for
use with the lightweight
style mixer. |
| STOCK CODE |
PRODUCT |
| 60CCLW01 |
# 1 0.9mm |
| 60CCLW02 |
# 2 - 1.2mm |
| 60CCSW03 |
# 3 - 2.0mm |
| 60CCSW05 |
# 5 - 2.6mm |
| 60CCSW07 |
# 7 - 3.2mm |
| 60CCSW10 |
#10 - 4.0mm |
| 60CCSW13 |
#13 - 5.0mm |
| 60CCSW18 |
#18 - 6.5mm |
| 60CCSW25 |
#25 - 8.2mm |
|
CUTTING NOZZLES - ANM/E
|
ANM oxy/acetylene cutting nozzles
for use with NM
cutters or HD cutting attachments. |
| STOCK CODE |
PRODUCT |
| 60CCANM01W |
#1 6mm |
| 60CCANM02W |
#2 12mm |
| 60CCANM03W |
#3 75mm |
| 60CCANM04W |
#4 100mm |
| 60CCANM05W |
#5 150mm |
| 60CCANM06W |
#6 300mm |
|
CUTTING NOZZLES - PNM
|
PNM oxygen/propane cutting nozzles. |
| STOCK CODE |
PRODUCT |
| 60CCPNM01W |
#1 6mm |
| 60CCPNM02W |
#2 12mm |
| 60CCPNM03W |
#3 75mm |
| 60CCPNM04W |
#4 100mm |
| 60CCPNM05W |
#5 150mm |
| 60CCPNM06W |
#6 300mm |
|
| |
|
next page - Euro MIG Welders
Accessories for Mini MIG
Welders
back to Welding index page
|
