PRO-RAILING™
  branches   |  about   |  catalogues   |  history   |  ordering   |  technical   |  contact   |  links   |  online store    >


PRODUCT SELECTOR:
Wrought Iron Components
Wire Mesh & Edging Sections
Tube Clamps & Tube
Expanded Metal
Perforated Metal
Flooring & Gratings
Handrailing
Steel Fencing Products
Perimeter Security
Roof Edge Protection
Gate Automation
Cantilever Gate Accessories
Sliding Door Hardware
Welding Products
Steel Sections
Channel Support
Steel Wire
Post Boxes
Paint and Sundries


Uprights for Glass Fittings - The PRO-RAILING Stainless Steel Handrail Component System

Pre-drilled and tapped lengths of 42.4mm and 48.3mm diameter tube. M8 tapped holes. In 304 and 316 Stainlss Steel.

PRO-RAILING End Upright for Glass Fittings

End Upright

304 Stainless
42.4mm dia - No. 18.04.701C
48.3mm dia - No. 18.04.701D

316 Stainless
42.4mm dia - No. 18.06.701C
48.3mm dia - No. 18.06.701D

PRO-RAILING Mid Upright for Glass Fittings

Mid Upright

304 Stainless
42.4mm dia - No. 18.04.702C
48.3mm dia - No. 18.04.702D

316 Stainless
42.4mm dia - No. 18.06.702C
48.3mm dia - No. 18.06.702D

 PRO-RAILING Mid Upright for Glass Fittings

Mid Upright

304 Stainless
42.4mm dia - No. 18.04.703C
48.3mm dia - No. 18.04.703D

316 Stainless
42.4mm dia - No. 18.06.703C
48.3mm dia - No. 18.06.703D

 

M8 threaded holes are produced by a flow forming process, which forces excess material into the hole. This then increases the thread length in thin walled tubes

PRO-RAILING - Flow Forming Process for M8 threaded holes

 

back to Pro-Railing Index          on to Pro-Railing Accessories
© Copyright 2010 FH Brundle site design: Net-Coms     hosting: Consult-X