|
How to order
When ordering please state metre run required. If not a straight
run or runs, specify other details such as corners etc.
To calculate components required, use the formula below:
Divide Length of run by 1.283 - this will give the number
of axles
Round figure up or down to give the No. of complete axles
Axles x 4 = No. of Vanes (pairs)
Vanes x 2 = No. of Belled Washers
Axles + 1 = No. of Standard Brackets and Top Pivots
|
|
Bolt threads may be welded or deformed after erection to prevent
removal.
Double and treble stacked barrier and double width available
to order.
|
